Key Features And Components; Available Models And Accessories - Magtek DynaFlex II Go Installation And Operation Manual

1 - Introduction
solution that accepts contactless EMV and NFC payments. DynaFlex II Go is suited for deployment in
many types of scenarios, including mobile handsets, tablets, and desktop computers.
DynaFlex II Go and DynaFlex II Go BCR are equipped with MagneSafe® Security Architecture (MSA).
The design and architecture meet the requirements for contactless EMV 3.0, PCI PTS POI v6.2, and
support triple DEA encryption with DUKPT Key Management.
1.1

Key Features and Components

DynaFlex II Go and DynaFlex II Go BCR are easy to install and configure, with key features that include:
1. Contactless EMV 3.0 approved
2. PCI PTS POI v6.2 approved
3. Optical reading for many 2D and 1D barcodes including PayPal and Venmo (DynaFlex II Go BCR
Model Only)
4. Transducer for audio cues
5. USB-C interface
6. Optional external clip or embedded lanyard
7. Triple DEA encryption / DUKPT key management
8. Ingress protection - IP 30
9. Apple Value Added Services (Apple VAS) protocol support
Figure 1-1 illustrates the major components of DynaFlex II Go (BCR model shown). Models without a
barcode reader are identical to the illustration, but do not have a camera and do not have a QR code
printed on the front face.
1.2

Available Models and Accessories

Table 1-1 - Available Models and Options
Part No. Description
21078400 DynaFlex II Go, PCI, BCR,
BLACK, BLUETOOTH LE
21078401 DynaFlex II Go, PCI,
BLACK, BLUETOOTH LE
DynaFlex II Go| EMV Contactless/NFC Card Reader | Installation and Operation Manual
Figure 1-1 - DynaFlex II Go Major Components
Display
None
None
Page 6 of 55 (D998200595-100)
Connection(s)
USB-C, Bluetooth LE
USB-C, Bluetooth LE
MS Windows, Mac OS,
Linux; Android Phone
MS Windows, Mac OS,
Linux; Android Phone