Lanner NCA-6530 User Manual page 59

NCA-6530 User Manual
2. For the rear rack installation, slide the
rail (outer channel) to aim and
engage the bolts on the rail's rear
end with the two (2) available holes
on the post, and the rail assembly will
click into place.
Installing the System into the Rack
1. Stretch both of the inner channel
out to their fullest extent. You will
hear a click sound when they are fully
stretched and locked.
2. Hold the system with its front facing
you, lift the chassis and gently
engage the rail brackets with the
inner channel, as shown in the
image below, and then push the
system into the cabinet.
59
Click
The inner channel will click
when it is fully stretched.
Rail Bracket
Inner Channel
Inner Channel
Click
Rail Bracket