Lanner NCA-6530 User Manual page 47

NCA-6530 User Manual
NCA-6530A and NCA-6530C is built with two 2.5" HDD/SSD swappable drive bays. Please follow the steps
for installation.
1. Power off the system. Locate the 2.5" disk
bay on the front panel.
2. To remove the tray, push down on the tab
and for the tab lever to slide open, and
then hold the tab lever to pull out the tray.
3. Unscrew one (1) screw on each side of the
tray and remove the metal partition.
4. Slide one 2.5" HDD/SSD into the tray and
secure with two (2) screws on each side.
Make sure HDD/SSD contacts are facing
outwards.
NCA-6530A/NCA-6530C
Tab Lever
47
Tab
HDD/SSD Contacts