Lanner NCA-6530 User Manual page 44

NCA-6530 User Manual
NCA-6530C and NCA-6530D supports two PCIe x16 FH/FL dual slot for GPU graphics card expansion. The
GPU graphic card requires a rather complex installation process; therefore, the assembly must be handled
with care. Please read through the instructions in this section to make sure you have acquired the necessary
knowledge and comply with the requirements.
1. Expansion Components
a.) The GPU Expansion Kit (Optional) will
include:
1x PCIe bracket
1x GPU power cable
1x screw packet
b.) Customer Owned:
1x GPU module
2. Power off the system and open the
chassis cover.
3. Unscrew the two (2) screws on the rear
panel. Lift the PCIe slot bracket cover up.
4. Pick up the new PCIe bracket, unscrew
the five (5) screws on the side to remove
the side metal partition.
PCIe bracket
44
GPU Module
GPU Module Power Cable