Lanner NCA-6530 User Manual page 43

NCA-6530 User Manual
5. Align the LAN module to the PCIe
bracket. Slide the LAN module into the
PCIe bracket until it is completely seated.
Make sure the side bar slides in properly
(as pictured below).
6. Place the metal partition back in place
and secure with the original four (4)
screws.
7. Align the socket key on the bracket to
the socket key on the motherboard.
Gently insert until it is firmly seated.
8. Secure with two (2) original screws on
the rear panel. The LAN module
installation is complete.
43