Lanner NCA-6530 User Manual page 49

NCA-6530 User Manual
NCA-6530B and NCA-6530D is built with twelve 2.5" NVME SSD swappable drive bays. Please follow the
steps for installation.
1. Power off the system. Locate the 2.5" disk
bay on the front panel.
2. To remove the tray, push on the tab for
the tab lever to slide open, and then hold
the tab lever to pull out the tray.
3. Slide one 2.5" NVMe SSD into the tray, and
make sure the SSD contacts are facing
outwards.
4. Then, turn the drive tray on the other side,
and secure the SSD with two (2) screws on
each side.
NCA-6530B/NCA-6530D
Tab Lever
Tab
HDD/SSD Contacts
49
HDD/SSD Contacts