Lanner NCA-6530 User Manual page 33

NCA-6530 User Manual
5. Press heatsink down firmly to engage
carrier latching features to the heatsink at
four corners.
6. If carrier latching features do not latch the
heatsink properly, engage each latching
features by pressing the heatsink at the
unlatched corner. You may hear a clicking
sound when latched.
System Assembly PHM to Motherboard
1. Locate the processor placement on the
motherboard. Hold finger grips on socket
cover and squeeze in on the grip tabs.
Then pull the cover up and off vertically to
remove.
2. Set each anti-tilt wire to inward or
unlocked position on the heatsink.
Tabs
33
Click