Table of Contents
Advertisement
NCA-6530 User Manual
Use [→] or [←] to select [Server Mgmt] setup screen. Under this screen, you may use [↑] [↓] to select an item
you want to configure.
Item
BMC Support
Wait For BMC
FRB-2 Timer
FRB-2 Timer
timeout
FRB-2 Timer
Policy
OS Watchdog
Timer
Option
Enabled
Enable or disables interfaces to communicate with BMC.
Disabled
Wait For BMC response for specified time out. In PILOTII, BMC
Enabled
starts at the same time when BIOS starts during AC power ON.
Disabled
It takes around 30 seconds to initialize Host to BMC interfaces.
Enabled
Enables or disables FRB-2 timer (POST timer).
Disabled
3 minutes
4 minutes
Enter value Between 3 to 6 min for FRB-2 Timer Expiration
5 minutes
value.
6 minutes
Do Nothing
Reset
Configure how the system should respond if the FRB-2 Timer
Power Down
expires. Not available if FRB-2 Timer is disabled.
Power Cycle
If enabled, it starts a BIOS timer which can only be shut off by
Enabled
Management Software after the OS loads. It also helps verify
Disabled
that the OS is successfully loaded or follows the OS Boot
Watchdog Timer policy.
Description
113
Advertisement
Table of Contents
