Applications; Intended Use / Use For Intended Purpose; Use For Other Than Intended Purpose; Liability And Guarantee - Gossen MetraWatt PROFITEST H+E EXPERT CHECK Operating Instructions Manual

Test instrument and function tester for ac charging stations per iec 61851-1, vde 0122-1
Table of Contents

Advertisement

PROFITEST H+E EXPERT CHECK
2

Applications

Please read this important information!
2.1

Intended Use / Use for Intended Purpose

The PROFITEST H+E EXPERT CHECK is a tester for checking AC charging points
in accordance with DIN EN/IEC 61851-1 (VDE 0122-1). The tester can be used to
check the performance of AC charging points. In combination with measuring/test
instruments from the PROFITEST MF or PROFITEST MASTER IQ series, the effec-
tiveness of protective measures can be tested at AC charging points.
The tester is intended exclusively for function tests conducted on AC charging
points in charging mode 3. The tester can be connected to AC charging points with
type 2 inlet or permanently attached type 2 cable (extended CP test pin for perma-
nently attached cables).
Safety of the operator, as well as that of the tester, is only assured when it's used
for its intended purpose.
2.2

Use for Other than Intended Purpose

Use of the tester for any purposes other than those described in these operating
instructions is contrary to use for intended purpose.
In particular, the tester is not suitable for use as an adapter for vehicle simulation in
accordance with VDE 0122-1 (DIN EN 61851-1) for the performance of required,
standards-compliant testing of charging infrastructures for electric road vehicles
and the associated part of the electrical system.
2.3

Liability and Guarantee

Gossen Metrawatt GmbH assumes no liability for property damage, personal injury
or consequential damage resulting from improper or incorrect use of the product, in
particular due to failure to observe the product documentation. Furthermore, all
guarantee claims are rendered null and void in such cases.
Nor does Gossen Metrawatt GmbH accept any liability for data loss.
2.4

Opening the Tester / Repairs

The tester may only be opened by authorized, trained personnel in order to ensure
flawless, safe operation and to assure that the guarantee isn't rendered null and
void. Even original replacement parts may only be installed by authorized, trained
personnel.
Unauthorized modification of the tester is prohibited.
If it can be ascertained that the tester has been opened by unauthorized personnel,
no guarantee claims can be honored by the manufacturer with regard to personal
safety, measuring accuracy, compliance with applicable safety measures or any
consequential damages.
3
Gossen Metrawatt GmbH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PROFITEST H+E EXPERT CHECK and is the answer not in the manual?

Table of Contents