Table of Contents
Advertisement
Gossen Metrawatt GmbH
• Do not use the tester and its accessories after extraordinary stressing due to
transport.
• Do not expose the tester to direct sunlight.
• The tester may only be used as long as the fuses are in flawless condition.
Defective fuses must be replaced.
• Never bypass the fuses. Never disable the fuses.
1.4
Damaged Tester
• The tester may not be used:
– If external damage is apparent
– If the test plug is damaged
– If it no longer functions flawlessly
– After long periods of storage under unfavorable conditions (e.g. humidity,
dust or extreme temperature)
– If any changes have been made to the tester itself or to the accessories
– If internal damage to the tester or accessories can be detected (e.g. loose
parts in the housing)
• If the tester or its accessories don't function flawlessly, permanently remove the
tester/accessories from operation and secure them against inadvertent use.
• If the tester or accessories are damaged during use, for example if they're
dropped, permanently remove the tester/accessories from operation and
secure them against inadvertent use.
PROFITEST H+E EXPERT CHECK
2
Advertisement
Table of Contents
Need help?
Do you have a question about the PROFITEST H+E EXPERT CHECK and is the answer not in the manual?