Applications; Intended Use / Use For Intended Purpose; Use For Other Than Intended Purpose; Liability And Guarantee - Gossen MetraWatt PROFITEST H+E EASY CHECK Operating Instructions Manual

PROFITEST H+E EASY CHECK
2

Applications

Please read this important information!
2.1

Intended Use / Use for Intended Purpose

The PROFITEST H+E EASY CHECK is a function tester for testing AC charging
points in accordance with DIN EN / IEC 61851-1 (VDE 0122-1) and permits auto-
matic testing of functional performance by laypersons. In the event of a confirmed
malfunction of the AC charging point, qualified personnel must become involved.
The tester is intended exclusively for function tests conducted on AC charging
points in charging mode 3. The tester can be connected to AC charging points with
type 2 inlet or permanently attached type 2 cable (extended CP test pin for perma-
nently attached cables).
Safety of the operator, as well as that of the tester, is only assured when it's used
for its intended purpose.
2.2

Use for Other than Intended Purpose

Use of the tester for any purposes other than those described in these operating
instructions is contrary to use for intended purpose.
2.3

Liability and Guarantee

Gossen Metrawatt GmbH assumes no liability for property damage, personal injury
or consequential damage resulting from improper or incorrect use of the product, in
particular due to failure to observe the product documentation. Furthermore, all
guarantee claims are rendered null and void in such cases.
Nor does Gossen Metrawatt GmbH accept any liability for data loss.
2.4

Opening the Tester / Repairs

The tester may only be opened by authorized, trained personnel in order to ensure
flawless, safe operation and to assure that the guarantee isn't rendered null and
void. Even original replacement parts may only be installed by authorized, trained
personnel.
Unauthorized modification of the tester is prohibited.
If it can be ascertained that the tester has been opened by unauthorized personnel,
no guarantee claims can be honored by the manufacturer with regard to personal
safety, measuring accuracy, compliance with applicable safety measures or any
consequential damages.
3
Gossen Metrawatt GmbH