Safety Instructions; General; Personnel Qualifications; Handling The Tester - Gossen MetraWatt PROFITEST H+E EXPERT CHECK Operating Instructions Manual

Test instrument and function tester for ac charging stations per iec 61851-1, vde 0122-1
Table of Contents

Advertisement

PROFITEST H+E EXPERT CHECK
1

Safety Instructions

1.1

General

• Carefully and completely read and adhere to these operating instructions.
The documents can be found at http://www.gossenmetrawatt.com. Retain
these documents for future reference.
• Carefully and completely read and adhere to the product documentation for the
tested/inspected AC charging point.
• Use only the specified accessories (included in the scope of delivery or listed as
options) with the tester.
• Use the tester and the accessories only for their intended purpose in accor-
dance with this documentation and the documentation for the associated test/
measuring instrument. Safety of the operator, as well as that of the tester, is only
assured when it's used for its intended purpose.
• Carefully and completely read and adhere to the product documentation for the
associated test/measuring instrument.
1.2

Personnel Qualifications

• The tester is designed exclusively for use by qualified electricians.
1.3

Handling the Tester

• Observe and comply with all safety regulations which are applicable for your
work environment.
• Only use the tester and its accessories within the limits of the specified technical
data and conditions (ambient conditions, IP protection code, measuring cate-
gory etc.).
Pay particular attention to maximum permissible loads for all connections.
• Do not use the tester in humid environments where condensation occurs, or in
environments with explosive gases.
• Never plug in wet connector plugs.
• Connect the test setups correctly in order to prevent injury to persons and dam-
age to the equipment.
• The USB socket must be covered when executing tests. Use the cover
attached to the tester for this purpose.
• No electrical loads may be connected to or operated via the measuring sockets
or the earthing contact socket.
• Do not use the tester and its accessories after long periods of storage under
unfavorable conditions (e.g. humidity, dust or extreme temperature).
1
Gossen Metrawatt GmbH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PROFITEST H+E EXPERT CHECK and is the answer not in the manual?

Table of Contents