Triumph Speed 400 Owner's Handbook Manual page 92

MAINTENANCE AND ADJUSTMENT
92
Clean the engine oil strainer.
▼
cldp
1. Engine oil drain plug
2. Engine oil drain plug O-ring
3. Engine oil strainer
4. Engine oil strainer O-ring
Evacuation Strainer
Remove the evacuation strainer
▼
plug with the evacuation strainer.
Allow the engine oil to drain.
▼
Pull the plug from the evacuation
▼
strainer and discard the O-ring.
Clean the evacuation strainer and
▼
evacuation strainer plug. Install a
new O-ring on the plug.
Install the evacuation strainer
▼
2
3
4
Install and tighten the evacuation
▼
strainer plug to 89 lbf in (10 Nm).
1
cleg
1. Evacuation strainer plug
2. Evacuation strainer plug O-ring
3. Evacuation strainer
4. Evacuation strainer O-rings
Engine Oil Filter
Remove the fasteners from the
▼
engine oil filter cover.
Remove the cover and discard the
▼
O-ring.
Using a suitable tool, remove the
▼
engine oil filter. Dispose of the old oil
and oil filter in an environmentally
friendly way.
Dip the engine oil filter in clean
▼
engine oil before installation.
Install a new O-ring on the cover.
▼
4
2
3
1