Triumph Speed 400 Owner's Handbook Manual page 60

GENERAL INFORMATION
60
Install the fasteners at the rear of
▼
the seat and tighten to 40 lbf in
(4.5 Nm).
2
cldw
1. Fasteners
2. Rider's seat
Never ride the motorcycle with the
fasteners loose or removed, as the
rider's seat will not be secure and can
move.
The rider's seat is only correctly
retained and supported when the
fasteners are correctly tightened.
A loose or detached seat may lead to
loss of motorcycle control which could
result in serious injury or death.
Grasp the seat and pull firmly
▼
upwards to make sure it is securely
retained.
Install the passenger seat as follows.
▼
Passenger Seat
Engage the two hooks at the front
▼
of the seat under the two loops on
the subframe.
Align the locating peg into the lock
▼
and press down engaging the seat
lock.
1
WARNING
NOTICE
An audible click can be heard when
the seat is fully engaged in its lock.
2
3
clfw
1. Locating peg
2. Hooks
3. Loops
4. Lock
WARNING
Never ride the motorcycle with the
passenger seat detached or removed.
To prevent detachment of the seat
during riding, after installation always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured
it will detach from the lock. A loose
or detached seat may lead to loss of
motorcycle control which could result
in serious injury or death.
Grasp the seat and pull firmly
▼
upwards to make sure it is securely
retained.
1
2
3
4