Hp 8133A - HP 8133A Service Manual

PULSE and PULSEmATA
PULSE Timing (Channel 1 and Option 003 Channel 2)
Period specifications and settings.
2 Delay variation only, if other parameters vary
Width and Duty-cycle parameters are mutually exclusive. The Duty-cycle setting is also subject to the Width
3
specification and setting.
+
Skew
4
Skew
=
PULSE Frequency (Option 003 Channel 2)
Delay (or Phase) must be within the limits given under Delay above. The Delay specifications
0.
The output frequency of Option 003 Channel 2 can be divided in both
and SQUARe modes:
PULSE
Frequency:
The TRIGGER frequency must also be divided by the same (or
1
higher) divisor
ps (i30 ps typical).
CHANNEL 2
PULSE
mode
2, 4, 8, 16, 32, 64
(Minimum: 3 typical)

HP 8133A

Pulse Generator Specifications
assume