Instrument Description; Hp 8112A Options - HP 8112A Operating, Programming And Servicing Manual

Instrument
Description
Note
HP 8 1 1 2A Options
Opt
Opt W30
1 ·2 Introduction
The HP 8 1 12A Programmable Pulse Generator operates over the
frequency range 1 Hz to 50 MHz with a maximum 32 V peak-to-peak
output signal delivered into a 50 fl/high impedance load.
Instrument capabilities include:
•
Fixed 5 ns transition times.
•
6.5 ns to 95 ms variable rise and fall times.
•
Variable delay in all modes
•
High and Low Level Limit for device under test (DUT) protection.
•
HP-IB programmable.
•
Easily accessible memory for up to 9 sets of mode and parameter
selections .
The self-prompting operation and HP-IB programmability of the
HP 8 1 12A ensure that it is quick and easy to use in stand-alone
and automatic-test applications. Self-test and fault diagnosis are
performed each time the instrument is switched on. Error recognition
(and prompt) helps the operator to recover from incorrect front panel
or programming operation.
Throughout this manual, instrument keys are shown as
text. "Key" is the key name which appears above the key on the
instrument front panel.
910
Option 910 is an extra Operating and Service Manual.
Extended Repair Service for the instrument .
�
in the