HP 8133A Service Manual page 102

iift edge of card cage
out
then pull
forwards
prise apart
0 0 0
0 0
0 0 0 0
0 0
0
,
Figure 5-10. Remove the card from the chassis
cage
2. Place your thumbs on the front top strut of the front frame and
your right hand fingers over the front edge of the card cage, lift
and pull forwards. The front of the card cage will move forward
over the edge of the front frame and can then be removed
completely. The fingers the left hand may be needed to ease
of
open the pin connector housing between the A1 assembly and the
A3 assembly.