Power Cable; Line Voltage Switch Assembly - HP 8133A Service Manual

Power Cable

Australia
8120-1369
South
Africa
8120-4211
Figure
Introducing the HP 8133A Pulse Generator
\
\
Figure 1-3. Line Voltage Switch Assembly
In accordance with international safety standards, this instrument
is equipped a three-wire power cable. When connected to an
appropriate AC power receptacle, this cable grounds the instrument
cabinet. The type of power cable shipped with each instrument
depends on the (country of destination. Refer to Figure
part numbers of the power cables available.
To avoid the possibility of injury or death, the precautionary
Warnings given on the inside front-cover of the manual must be
followed beforc? the instrument is switched on.
Denmark
8120-2956 8120-1689
Switzerland
8120-2104
United States 12OV
8120-1378
Power Gables
1-4.
The following work should be carried out by a qualified electrician -
all local electrical codes being strictly observed. If the plug
Europe Great Britain
8 12 0-1 31 51
Japan 120V
8120-4753
-
Plug Identification
for the
1-4
on
the