Table of Contents
Advertisement
Figure 80. Installing the SD module assembly
5. Connect the SD module to the USB 2.0 connector on the system board. See "System board
components" on page 28.
ThinkServer RAID Super Capacitor Module
The ThinkServer RAID Super Capacitor Module protects the cache memory on the installed ThinkServer
RAID card.
• "Removing the ThinkServer RAID Super Capacitor Module" on page 95
• "Installing the ThinkServer RAID Super Capacitor Module" on page 96
Note: Use any documentation that comes with the ThinkServer RAID Super Capacitor Module and follow
those instructions in addition to the instructions in this topic.
Removing the ThinkServer RAID Super Capacitor Module
To remove the ThinkServer RAID Super Capacitor Module, do the following:
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 49.
2. Disconnect the cable of the ThinkServer RAID Super Capacitor Module from the RAID card.
3. Gently press the tab on the ThinkServer RAID Super Capacitor Module bracket and remove the
ThinkServer RAID Super Capacitor Module assembly as shown at the same time.
.
Chapter 5
Replacing hardware
95
Advertisement
Table of Contents
