Table of Contents
Advertisement
Figure 25. Memory module installation order
Removing a memory module
To remove a memory module, do the following:
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 49.
2. Lay the server on its side for easier operation.
3. Locate and remove the memory module.
Figure 26. Removing a memory module
4. If you are instructed to return the old memory module, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
Installing a memory module
Note: Ensure that you follow the memory module installation rules when performing the operation. See
"Memory module installation rules" on page 52.
To install a memory module, do the following:
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 49.
2. Lay the server on its side for easier operation.
3. Locate the memory slots on the system board and remove the memory dummy if necessary.
x x
x x
x x
x x
x x
x x
x x
x x
x x
- x x
x x
x x
x x
x - x
x - x
x x
- x -
x x
x x
- x x
x
x x
x x
.
Chapter 5
Replacing hardware
53
Advertisement
Table of Contents
