Table of Contents
Advertisement
Figure 70. Removing the front system fan 1
4. If you are instructed to return the old front system fan 1, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
Installing the front system fan 1
To install the front system fan 1, do the following:
1. Prepare your server and remove the server cover. See "Preparing your server in advance and removing
the server cover" on page 49.
2. If needed, remove the old front system fan 1. See "Removing the front system fan 1" on page 86.
3. Position the new front system fan 1 into the chassis so that the two tips
corresponding holes in the mounting area. Meanwhile, ensure that the two posts
fan 1 are aligned with the corresponding holes in the inner side of the chassis. Then, carefully slide the
front system fan 1 into the chassis until it snaps into position.
1
2
1
1
are aligned with the
2
.
Chapter 5
of the front system
87
Replacing hardware
Advertisement
Table of Contents
