Frame Start Trigger (Edge Preset) - Omron STC-MBS312U3V Product Specifications And User's Manual

The exposure synchronizes trigger signal.
The value on Exposure Time is actual exposure time.
When the polarity on Line Inverter is positive (false), the Exposure starts on the rising edge of trigger.
When the polarity on Line Inverter is negative (true), the Exposure starts on the falling edge of trigger.
To work the camera under this mode, as following setting have to be set.
・Exposure Mode: Timed
・Trigger Selector: Frame Start
・Trigger Mode: On
(*) On Trigger Mode except Frame Start should be set Off.
Timing
トリガー入力(正極性)
トリガー入力(負極性)
露光
映像出力
Delay time on exposure start timing in the sensor Jitter (unit: μseconds
Video Output Format
8bits
10bits
10bits Packed
12bits
12bits Packed
STC-MBS312U3V / STC-MCS312U3V / STC-MBS500U3V / STC-MCS500U3V
Product Specifications and Use's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Trigger Input
(Positive)
I/O遅延(tIPDLH)
I/O Delay (tIPDLH)
Trigger Input
(Negative)
I/O Delay (tIPDHL) I/O遅延(tIPDHL)
Exposure
VideoOut
LineDebounceTime
TriggerDelay
Exposure Start Duration inside of sensor
センサー内部の露光開始遅延
STC-MBS312U3V
STC-MCS312U3V
0 to 11.4
ExposureTime
)
STC-MBS500U3V
STC-MCS500U3V
0 to 13.4
No.16S024-02
31/64