Setting The Delay Mode - Uniden BC895XLT User Manual

To directly access a specific channel:
m
1. Press .
2. Use your keypad to enter the channel number you want.
m
3. Press again.

Setting the Delay Mode

A delay can be set for each programmed channel so that when Scan or Search stops on a channel
there is a brief pause before the scanning cycle resumes. Delay must be set for each programmed
channel, and it can be set when your scanner pauses during a scan or when manual mode is
selected.
To set Delay in Scan or Search Mode:
s
1. Press or set a search range and
S
press .
2. When your scanner stops on a channel,
Y
press .
DELAY displays and scanning will resume
two seconds after the transmission ends.
To set Delay in Manual Mode:
m
1. Press .
2. Select the channel you want using your
keypad or Rotary Tuner.
Y
3. Press .
DELAY displays indicating the scanner will
pause on the channel when a
transmission is received.
23