Data Skip; Channel Skip - Uniden BC895XLT User Manual

h
2. Press to move to the next higher
frequency
— or —
i
3. Press to move down to the
previous frequency.
Note: You can also use the Rotary Tuner to move to other frequencies, just make sure that FREQ
is selected before turning the dial.
S
4. Press to resume searching.

Data Skip

A scanner will normally stop on any transmission it receives. This means the
on data signals and unmodulated transmissions. You can automatically skip many of these types of
transmissions during searches.
d
1. Press to activate the data skip
feature.
The d
display.
d
2. Press again to cancel the data skip
feature.
The d
from the display.
When data skip is active, your scanner may pause momentarily on an unwanted signal but will
resume searching in 2 or 3 seconds.

Channel Skip

If a particular channel continues to interrupt search scanning, it is possible to set your scanner to
skip the frequency.
To skip a frequency, press
Note: You can program up to 20 skip
frequencies. The 21st skip frequency
entered causes the first skipped
frequency to unlock.
indicator appears on the
indicator disappears
L
.
SCAN MANUAL
PRI TRUNK DATA
L/O DELAY CTCSS
31
will stop
BC895XLT
1 2 3
4 6
5
9
7 8
E
0