To Set Delay In Scan Mode; To Set Delay In Manual Mode - Uniden Bearcat UBC 248CLT Reference Manual

To Set Delay in Scan Mode

1. Press SCAN.
2. When your scanner stops on a channel, press
DELAY. DLY appears in the display and
scanning resume 2 seconds after the transmission
ends.

To Set Delay in Manual Mode

1. Press MANUAL.
2. Select the channel you want using your keypad.
3. Press MANUAL again.
4. Press DELAY. DLY appears in the display.
LIMIT/
LIMIT/
LIMIT/
.
LIMIT/
20
SEARCH HOLD/
SEARCH HOLD/
SEARCH HOLD/
SEARCH HOLD/