Restoring all IDs
To unlock all locked out IDs at once, follow these steps:
1.
Press and hold
short beeps.
e
2.
Press
to unlock all the IDs at once.
Note: If you unlock all the IDs, then the Scan List Memory mode displays. Press
scan the IDs stored in your Scan Lists or press
information about Scan Lists, see page 45.
S
3.
Press
to return to the Search mode.
Searching Tips
ID Delay Mode
Y
Use the
seconds while you wait for a reply. Other groups may use the system, but your scanner will
only look for the ID in the display.
Note: If you consistently miss responses while in ID Delay mode, you may need to change
the default system type or change the fleet map you're using.
Hold Mode
h
Press
is really noticeable. You can hold a specific talk group, such as fire department on-scene
operations, no matter which frequency the group uses.
L
until you hear two
key to select the Delay mode if it's not active. This mode holds an ID for 5
to hold on a particular ID in the display. This is where the trunk tracking effect
S
to return to the Search mode. For
43
s
to