Tape Recording Channel Communication - Uniden BC895XLT User Manual

3. Press and hold
designate this channel as your new
Priority Channel.
Two beeps indicate that the Priority
Channel is changed.

Tape Recording Channel Communication

You can set any channel for recording while scanning. Then, if your scanner stops on a channel you
have designated for recording, the transmission and its time, as well as the channel number and
frequency, are all recorded.
However, before you can use this feature, you must connect a tape recorder to your scanner. For
information about attaching a recorder to your scanner, see For use with an optional tape recorder
on page 11.
To program a channel for tape recording:
1. Use your keypad or Rotary Tuner to
select the channel you want recorded.
x
2. Press .
LINE displays indicating that the channel
will be recorded if you've connected a
tape recorder to your scanner.
Repeat these steps to select other channels for recording.
To record a channel, press
channel is recorded.
To turn the record feature off for a channel:
1. Use your keypad or Rotary Tuner to
select the channel you do not want to
record anymore.
x
2. Press .
LINE turns off and the channel will not be
recorded.
p
for two seconds to
s
. When your scanner stops on a channel which displays LINE, the
SCAN MANUAL
PRI TRUNK
L/O DELAY
27
1 2
4
5
DATA
7 8
CTCSS
0
3
6
9
E