Priority Scan; Changing The Priority Channel - Uniden BC895XLT User Manual

Priority Scan

When Priority Scan is turned on, your scanner checks the priority channel every two seconds for
activity. If a signal is present on the priority channel, your scanner monitors the channel until the
transmission ends, then resumes normal scanning. You can designate one channel in each bank as
a Priority Channel.
To activate Priority Scan (in either the Manual or Scan Mode):
p
1. Press .
Note: If you have locked out the priority
channel, this message appears when you
select Priority mode.
p
2. Press again at anytime to
deactivate Priority Scan.

Changing the Priority Channel

You cannot eliminate the Priority Channel, but you can change it to any of the 30 available channels
in each bank.
m
1. Press .
2. Select a new Priority Channel.
a. Enter the channel number.
b. Then press
m
again.
P
P
SCAN MANUAL
PRI TRUNK DATA
L/O DELAY CTCSS
26
2
1 3
4
6
5
a
9
7 8
E
0