Searching A Trunked Bank - Uniden BC895XLT User Manual

If you enter a non-800 MHz trunked
repeater output frequency, an error
message displays for two seconds and
then the scanner resets.
m
4. Press either
next channel in the bank.
5. Repeat steps 3 and 4 until all frequencies
have been entered.
S
6. Press to begin searching the bank
you've programmed.
Note: You will see the frequencies
quickly displaying as your scanner looks
for the data channel which controls the
system.

Searching a Trunked Bank

Before you Search a Trunked Bank with your scanner, consider the following:
You can only trunk track one bank at a time.
t
Use to toggle between the conventional and the trunk tracking modes.
d
Press
appropriate bank icon will flash at the top of the display for 5 seconds.
If you have programmed frequencies for a trunked system in one or more of the 10 available banks
and you are in conventional mode, follow these steps to begin trunk searching:
t
1. Press .
The bank indicators begin to flash.
2. Use the alpha keys to select the trunked
bank you want.
For example press
Note: You will see the frequencies
quickly displaying as your scanner looks
for the data channel which controls the
system.
h
or to select the
while in the Trunk Tracking mode to review which bank is currently in use. The
B
.
40