Setting The Delay Time; Setting The Search Frequency Step - Uniden UBC3500XLT Owner's Manual

Hide thumbs Also See for UBC3500XLT:

Table of Contents

Off - the scanner remains on the channel until the

transmission stops.

Notes:

• If you are trying to test the Close Call feature with

a nearby transmitter and you do not talk into the

transmitter, the scanner will detect this as data

and will skip the frequency when Data Skip is on.

Turn the feature off or talk into the transmitter.

• This setting is ignored for AM/WFM/FMB

channels.

• The default setting for this feature is Off.

Setting the Delay Time

Set Delay Time

This setting determines how long the scanner waits

after a transmission ends before resuming quick

search or Close Call operation. Select your setting,

then press the scroll control.

Off The scanner resumes immediately when the

transmission ends.

1-5 sec The scanner waits the set amount of time

after the transmission ends before resuming.

Note: The default setting is 2 sec.

Set Step

This setting selects the frequency step used for setting

the channels. Select your setting, then press the scroll

control.

Auto The step is based on the band (see the table at

the front of the manual)

Srch/CloCall Opt

Table of Contents