Basic Operation; Setting The Squelch - Uniden BC895XLT User Manual

Note: You can fold out the Front Cover to see the Controls and Indicators while reading this
Guide.

Setting the Squelch

To set the squelch, you must be in the Manual mode, and you should not be receiving a signal on
your scanner.
m
1. Press until you do not hear a signal.
2. Adjust VOLUME to a comfortable listening
level.
3. Think of the Squelch Control as a gate. Turn SQUELCH fully counter-clockwise. This raises the
"Squelch Gate" so high that only very strong signals can get through.
4. Turn SQUELCH fully clockwise until you hear a hiss. This lowers the "Squelch Gate" so that
everything gets through—noise, weak signals, and strong signals.

Basic Operation

SQUELCH
VOLUME
SQUELCH
VOLUME
13
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
NOISE
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
NOISE
VOLUME