Uniden BC895XLT User Manual page 46

s
6. Press to begin scanning the lists
you have programmed.
If you haven't programmed any IDs, SCAN
displays but your scanner cannot stop on
an active conversation.
7. To remove a Scan List from active
scanning, press the number of the Scan
List on your keypad.
The Scan List indicator turns off, and the
IDs in that list are not scanned.
Note: One Scan List must always be active. If you try and deactivate all the Scan Lists,
Scan List A will automatically be active.
8. To restore a Scan List to active scanning,
press its number again.
S
9. Press to return to Trunk Tracking
Search mode.
Programming Scan Lists During Search
To select a Scan List location and store an ID during Search mode, follow these steps:
1. When your scanner stops on an ID you
want to store, press
2. Use either the Rotary Tuner or the
i
or to select the Scan List memory
location you want, then press
S
3. Press to return to Trunk Tracking
Search mode.
p
.
h
e
.
46