PDR8000® Portable Digital Repeater and Booster Pack Deployment Guide
Document Revisions
Revision
Date
D2
2017-05-09
R1.0
2017-05-25
R2.0
2017-10-02
R2.1
2018-02-26
R3.0
2018-07-19
R4.0
2019-09-23
R4.01
2020-07-30
R5.0
2021-11-15
R5.01
2022-12-02
R5.02
2023-02-14
R5.03
2023-07-19
R5.04
2023-12-18
Subscribe to our newsletter if you want to be informed about new releases and updates. Please
visit
http://futurecom.com/support/newsletter/
© 2023 Futurecom Systems Group ULC.
Printed in Canada. All Rights Reserved
Futurecom, PDR8000®, the Futurecom Logo and the Stylized FC logo are registered
trademarks of Futurecom Systems Group, ULC. All other trademarks are the property of their
respective owner.
No part of this document, or any software included with it, may be reproduced and distributed
without the prior written permission of the copyright holder.
Futurecom Systems Group ULC. reserves the right to make changes or improvements to the
equipment, software or specification described in this document at any time and without prior
notice. These changes will be incorporated in the new releases of this document.
This document may contain technical inaccuracies or typographical errors.
Futurecom Systems Group ULC. waives responsibility for any labour, materials or costs
incurred by any party as a result of using this document.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All
other trademarks are the property of their respective owners.
December 2023
Notes & References
Contents applicable to R2.0 and R1.0; added newsletter info
Correction of DC voltage 13.8V made
R3.0 Updates - Keypad/Display, V.24 interface details, cable pinouts
®
PDR8000
R4.0 and Booster Pack updates
FRC references change
Changes to R5.0 DFSI menu items and other
Updated Status LED info
Added V.24 Note
Updated Keypad/Display "Link" menu
Allow configuration of Duplexer Losses
Proprietary Statement
Document 8K088X03 R5.04
Trial Release
Initial Release
Page 2 of 35
Need help?
Do you have a question about the PDR8000 and is the answer not in the manual?