Futurecom PDR8000 Deployment Manual page 11

PDR8000® Portable Digital Repeater and Booster Pack Deployment Guide
Internal Duplexer
•
ANTENNA cable is connected ANTENNA connector
•
AUX, RF OUT, and RF IN are not connected
Simplex
•
ANTENNA cable is connected ANTENNA connector
•
AUX, RF OUT, and RF IN are not connected
Internal Duplexer and Booster Pack
•
AUX cable is connected from AUX connector of PDR8000 to AUX connector of Booster
Pack
•
ANTENNA cable is connected to ANTENNA connector
•
RF cable is connected from RF OUT connector of PDR8000 to RF IN connector of
Booster Pack
•
RF cable is connected from RF IN connector of PDR8000 to RF OUT connector of
Booster Pack
External Duplexer
•
Duplexer cable (supplied by end user) is connected from RF OUT connector of
PDR8000 to TX port of External Duplexer
•
Duplexer cable (supplied by end user) is connected from RF IN connector of PDR8000
to RX port of External Duplexer
•
AUX and ANTENNA are not connected
External Duplexer and Booster Pack
•
AUX cable is connected from AUX connector of PDR8000 to AUX connector of Booster
Pack
•
RF cable is connected from RF OUT connector of PDR8000 to RF IN connector of
Booster Pack
•
Duplexer cable (supplied by end user) is connected from RF IN connector of PDR8000
to RX port of External Duplexer
•
Duplexer cable (supplied by end user) is connected from TX port of External Duplexer to
RF OUT end connector of Booster Pack.
•
The ANTENNA cable is connected to the ANTENNA port of the External Duplexer
•
The ANTENNA connector of PDR8000 is not connected
December 2023
Document 8K088X03 R5.04
Page 11 of 35