Daikin iLINQ Room Terminal Installation & User Manual page 32

Setting Range
Wi-Fi Enable N/A
Not Connected
Wi-Fi State Connecting
Connected Error
Auto
1 (2412 MHz)
2 (2417 MHz)
3 (2422 MHz)
4 (2427 MHz)
5 (2432 MHz)
Channel
6 (2437 MHz)
7 (2442 MHz)
8 (2447 MHz)
9 (2452 MHz)
10 (2457 MHz)
11 (2462 MHz)
None
Security
WPA-PSK
Password Minimum 8 Characters
Minimum 1 Character
Network Maximum 32 Characters
Name (Special characters not
recommended)
Save Icon
Figure 34 - Wi-Fi Hotspot Configuration Page
Default State Description
If Enabled, the Wi-Fi hotspot is enabled with the current
active Wi-Fi settings
Disabled
If Disabled, the Wi-Fi hotspot is disabled (Wi-Fi settings are
retained)
Not Connected Current State of the Wi-Fi interface
Auto 2.4 GHz Wi-Fi channel frequencys
None: no access protection for Wi-Fi hotspot
NONE WPA-PSK: Wi-Fi Protected Access Pre-Shared Key needed to
access the Wi-Fi hotspot
Password required to connect to the Wi-Fi Hotspot when the
12345678
Security setting is set to WPA-PSK
No Selected
Wi-Fi Hotspot SSID
Network
Tap save icon to save Wi-Fi Hotspot configuration. This is
required on initial configuration of the Wi-Fi hotspot, or if the
Channel, Security, or Password settings are changed.
After initial configuration of Wi-Fi Hotspot, the Wi-Fi Enable
toggle switch is used to enable/disable the Wi-Fi Hotspot with
the previously configured Wi-Fi settings.
32