Table of Contents
Advertisement
Installation of expansion option box
Expansion option box
65
24
Rear side
cable outlet
Layout of expansion option box
Fig.3-34 ： Outside dimensions and layout
■ Installation method
Remove the side plate of the controller, connect the connectors, and fix to the controller with the four fixing
screws in the expansion option box.
The option cards mounted in the slot are fixed with the plates with rails.
The cables required for the option card are lead out from the cable outlet on the rear side.
Controller
299.7
87.5
Installation
screw
Four
positions
42
Plates with rails
(Two positions)
Installation screw(Four positions)
The example which an option
card was mounted to.
Fan
Positioning latch
（38）
Slot１
Controller connection connector
Slot２
Slot３
3Controller
Positioning latch
290
Positioning latch
Grounding terminal(M4)
Options 3-123
（13）
Advertisement
Table of Contents
