Table of Contents
Advertisement
Recommended settings for copy jobs
Recommended settings for copy jobs
Introduction
Use the advised settings to optimize the output of your copy job.
Dependent of a color or grayscale copy job, select the corresponding settings.
Workflow
1. Start by selecting the best image preset for your job. Use column two in the table below, or
for more information see
2. When you want to further optimize the settings, you can select the advanced settings, under
[Show all settings] on the user panel. When you want to influence the imaging process and
thus optimize the output quality, you can select the corresponding [Original type] for your job.
Use column three in the table below, or for more information see
jobs on page 230
Advised settings for color copy
Original document
(Folded) CAD drawing
(Folded) CAD drawing with
marks from marker pens
Map, GIS, business graph-
ics, etc.
Architectural impressions,
artwork etc.
Photos, posters, and high
definition color prints
Medium quality color
prints
Advised settings for grayscale copy
Original document
(Folded) CAD drawing
240
Chapter 4 - Use the printing system
The Image preset for copy jobs on page
The original type on page
and
[Image] preset
[Fast CAD]
with large area fills:
[Normal color]
[Fast CAD].
with large area fills:
[Normal color]
[Normal color]
[Normal color]
[Photo/Poster]
[Normal color]
Preset [Image]
[Fast CAD B/W]
with large area fills:
[Normal CAD B/W]
229.
Advanced settings for copy
242.
Optimize under [Show all settings]
• For folded originals set the origi-
nal type to [Folded lines/text]
• When you want to emphasize col-
ors, set [Color highlighting] to
[On].
• For folded originals set the origi-
nal type to [Folded lines/text]
• When you want to emphasize col-
ors, set [Color highlighting] to
[On].
Set original type to [Artwork]
Optimize under [Show all settings]
For folded originals set the original
type to [Folded lines/text]
4
Advertisement
Table of Contents
