Table of Contents
Advertisement
Configure the media profiles
Introduction
In WebTools Express you can configure the media profiles on the printer.
Procedure
1. Select the [Media] - [Media types] tab to get an overview of all the media profiles that are
available on your ColorWave 3800 printing system.
2. Click the media type, to check the media information.
3. Click the check box of a media type and click the [Enable] button to make the media profile
available on the user panel and in the print job submission applications. If you [Disable] a media
profile it will no longer be available on the user panel and in the print job submission
applications.
4. Click [Install] if you must install a new media profile.
NOTE
You must download the new media profile before you can install it to the ColorWave
3800 embedded controller. Contact your local representative for new media profiles.
5. Click [Delete] to remove a media profile that is no longer needed.
NOTE
This action cannot be undone.
Chapter 3 - Define your workflow with WebTools Express
Configure the media profiles
185
Advertisement
Table of Contents
