Table of Contents
Advertisement
Adjust the media properties
Setting
[Compatible with
the Top Delivery
Tray output]
[Vacuum suction] The vacuum sucks the media onto the print surface and assures reliable cut-
[Media type ID]
184
Chapter 3 - Define your workflow with WebTools Express
Value
Most media are compatible with the Top Delivery Tray. The performance de-
pends on the media type, media width, or environmental conditions.
When media is not compatible with the Top Delivery Tray select [no]. Not
compatible:
• Media on a 2-inch core roll.
• Very flexible media, such as textile.
• Very stiff or thick media, such as canvas.
• Media with a sticky coating.
• Media that cannot be cut.
• Media with high toner crystallization will show marks on the output.
ting. Select one of the four values:
• [Very low] for very thin, low-weight media.
• [Low] for film and thin textile.
• [Medium] for normal paper.
• [High] for thick, stiff, high-weight media.
Fill in the media type ID. The ID will be displayed in the OJT ticket, so it is
advised to align the media type ID with the media name.
Advertisement
Table of Contents
