Installation In Multiple Combinations; Operation - HomeMatic HmIP-WTH-1 Installation And Operating Manual

Operation

6.2.4 Installation in multiple
combinations
You can mount the wall thermostat
with the attachment frame (A) provided
or use it with frames of other manu-
facturers as well as integrate the elec-
tronic unit (B) into a multi-gang frame.
You can flexibly fix the mounting plate
(F) to the wall using adhesive strips
or screws. For mounting with multi-
ple combinations, make sure that the
mounting plate of the wall thermostat
is seamlessly aligned to the already
fixed mounting plate/retaining ring.
The wall thermostat is designed to fit
into frames supplied by the following
manufacturers:
Manufacturer Frame
Berker S.1, B.1, B.3, B.7 glass
ELSO Joy
System 55, Standard
GIRA 55, E2, E22, Event,
Esprit
1-M, Atelier-M,
merten M-Smart, M-Arc,
M-Star, M-Plan
A 500, AS 500, A plus,
JUNG
A creation
7 Operation
After configuration, simple operations
are available directly on the device.
If the wall thermostat is in standby
mode, please press the control
wheel (E) once before operation
to activate the device.
• Temperature: Turn the control
wheel (E) to the right or to the left
to manually change the tempera-
ture. In automatic mode, the ma-
nually set temperature will remain
the same until the next point at
which the schedule changes. After-
wards, the defined heating sche-
dule will be activated again. During
manual operation, the temperature
remains activated until the next
manual change.
• Boost function for Homematic IP
Radiator Thermostats: Press the
control wheel (E) of the wall ther-
mostat briefly to activate the boost
function for heating up the radia-
tor quickly and briefly by opening
the valve. There will be a pleasant
room temperature right away be-
cause of the radiated heat.
23