Function And Device Overview - HomeMatic HmIP-WTH-1 Installation And Operating Manual

Function and device overview

Using the device for any purpose
other than that described in this
operating manual does not fall
within the scope of intended use
and will invalidate any warranty or
liability.
4 Function and device
overview
The Homematic IP Wall Thermostat
offers time-controlled regulation of
floor heating systems in connection
with Homematic IP Floor Heating Ac-
tuators or conventional radiators using
Homematic IP Radiator Thermostats
according to individually tailored hea-
ting phases. The wall thermostat serves
to measure the temperature and hu-
midity in a room. The data is cyclically
transmitted to a floor heating actuator
or radiator thermostats in order to re-
gulate the room temperature precisely.
You can pair the wall thermostats with
a Homematic IP CCU3 or connect it to
the Homematic IP access point in or-
der to control the device comfortably
via the Homematic IP app. Thanks to
battery operation, the device is highly
flexible where mounting and selecting
a mounting location are concerned.
The device is mounted and removed
very easily with the supplied clip-on
frame using screws or adhesive strips.
It is compatible with a number of diffe-
rent surfaces including furniture, brick
walls, tiles or glass. It is also possible to
integrate the wall thermostat into exis-
ting switches.
Device overview:
(A) Clip-on frame
(B) Electronic unit (thermostat)
(C) Display
(D) System button (pairing button and
LED)
(E) Control wheel
(F) Mounting plate
Display overview:
Set/actual temperature
Humidity
Warning about condensation
Open window symbol
Battery symbol
Radio transmission
Boost function
Manual mode
Automatic mode
Holiday mode
Heat
Cool
Operating lock
Setpoint temperature
B
C
D
E
F
18