Table of Contents
Advertisement
11.8
Installing the engine guard (All XC‑F models)
11.9
Removing the frame protector
11.10
Installing the frame protector
–
Position the engine guard on the frame.
–
Mount screws
Guideline
Remaining screws,
chassis
–
Mount screws
Guideline
Remaining screws,
chassis
The engine guard is directed evenly toward the front.
–
Tighten all the screws of the engine guard.
Guideline
Remaining screws,
chassis
F03638-11
–
Remove the cable ties.
–
Remove screws
–
Take off the left frame protector.
–
Push the right frame protector to the front and take off at the
bottom.
S05340-10
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount screws
Guideline
Screw, frame protec-
tor
–
Secure the frame protector with cable ties.
S05340-11
SERVICE WORK ON THE CHASSIS 11
1
, but do not tighten yet.
M6
10 Nm (7.4 lbf ft)
2
with bushings, but do not tighten yet.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
1
with the bushings.
1
with the bushings and tighten.
M5
3 Nm (2.2 lbf ft)
57
Advertisement
Table of Contents
