Bleeding The Fork Legs; Cleaning The Dust Boots Of The Fork Legs - KTM 350 SX-F 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.3
11.4
54
401943-10

Bleeding the fork legs

F03665-10

Cleaning the dust boots of the fork legs

F03666-10
(All XC‑F models)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
with your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded
up and secured with the rubber strap.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the fork protector. (
Main work
–
1
Push dust boots of both fork legs downward.
Info
The dust boots remove dust and coarse dirt particles
from the inside fork tubes. Over time, dirt can accumu-
late behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when nec-
essary.
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
1
to the ground
p. 53)
.
p. 53)
p. 53)
p. 55)