13 WHEELS, TIRES
13.2
104
Installing the front wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
H00935-10
F03724-01
S05369-11
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease (
p. 152)
–
Insert a spacer.
–
Clean and lightly grease the wheel spindle.
Long-life grease (
p. 152)
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
(350 XC‑F US Factory Edition)
–
Position the brake disc guard.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Operate the hand brake lever several times until the brake lin-
ings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
3
Tighten screws
.
Guideline
Screw, fork stub
1
and contact surfaces
2
.
M20x1.5
35 Nm (25.8 lbf ft)
p. 53)
M8
15 Nm (11.1 lbf ft)
A