Adjusting The Characteristic Map Of The Throttle Response - KTM 350 SX-F 2023 Owner's Manual

16.3

Adjusting the characteristic map of the throttle response

Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide
plate.
A guide plate with a different characteristic map is supplied.
Main work
(All SX‑F models)
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
–
Loosen nut
–
Turn adjusting screw
–
Loosen nut
–
Push cold start button
–
Turn adjusting screw
moves to the basic position when the throttle grip is turned
to the front.
–
Tighten nut
–
Turn adjusting screw
tle cable at the throttle grip.
Guideline
Play in throttle cable
F03742-10
–
Tighten nut
–
Slide on sleeve
–
Check the throttle grip for smooth operation.
Finishing work
–
Check the play in the throttle cable. (
Main work
–
Push back sleeve
–
Remove screws
–
Detach the throttle cables and take off the grip tube.
F03743-10
TUNING THE ENGINE 16
1
.
2
.
3
in as far as possible.
4
.
6
all the way to the stop.
5
so that the cold start button
4
.
3
so that there is play in the throt-
3 ... 5 mm (0.12 ...
0.2 in)
2
.
1
.
p. 120)
1
.
2 3
and half-shells .
121