Table of Contents
Advertisement
Step 2: To unlock the door, pull the handles that
are placed under the hood towards you and up.
Step 3: Push the metal cover strip in left and
right.
Step 4: Next, grip the door by the designated
handles. Slightly lift the door with glass window
out of the rabbet and carefully remove it from
the fireplace.
Putting the door back in place
To put the door back in place, follow the steps
described in step 4 in reverse order. Lock the
door by moving the handles down. Twist the
metal cover strips (step 3) back in its original
position, by using the overlapping edge on the
upper side of the strip and fold the metal cover
strip down.
7.3
Replacing batteries
If the red LED on the top right of the remote
control no longer lights up if you press any of the
buttons, the battery needs to be replaced.
Replace the battery in the remote control as
follows:
Grasp the remote control on-the-head and
•
turn it over.
Place your thumb as shown below.
•
Press the back lightly with your thumb and
•
slide the cover upwards at the same time.
Replace the battery into the remote control
•
(1 x AAA)
Replace the cover in reverse order.
•
7.4
Disassembly and disposal
Dismantle the device at the end of its service life
according to local laws and regulations.
Remove the battery from the remote control.
Return used batteries to a disposal point.
CAUTION!
The windows of the gas fire are made of ceramic
glass and must not be disposed of in the bottle
bank.
29
Advertisement
Table of Contents
