Table of Contents
Advertisement
The table below lists the types of products never
to be used when cleaning the anti-reflective
glass:
Never use the products
below:
toilet cleaners
hydrochloric acid
bleach domestos
benzene, hexane or
petroleum-based solvents
scouring powders, abrasive
materials, steel wool,
scrubbing or scouring pads,
scrapers, razor blades,
paper, ceramic stove
cleaners
7.2
Door removal
7.2.1
Door dismantling and assembly
(corner and three-sided appliances)
WARNING
Wear (rubber) gloves to prevent stains on the
glass.
Step 1: To unlock the door, pull the handles
under the hood towards you and up.
Step 2: Push the metal cover strip in left or right.
The glass coating can
be damaged by :
alkaline detergents or
detergents with high
levels of ammonia
acids
chlorine or sodium
hypochlorite
detergents
solvents
Aggressive cleaning
materials
Step 3: Next, grip the door by the designated
handles. Slightly lift the door with glass window
out of the rabbet, move the entire door slightly
to the left or right (corner fireplace) and carefully
lift it entirely out of the fireplace. In a three-sided
appliance the door will fall forward slightly and
you will be able to lift it straight out of the
rabbet.
Putting the door back in place
To put the door back in place, follow the steps
described in step 3 in reverse order. Lock the
door by moving the handles down. Twist the
metal cover strips (step 1) back into its original
position by using the protruding lip at the upper
side of the strip.
7.2.2
Door dismantling and assembly
(front models)
Door removal
WARNING
Wear (rubber) gloves to prevent stains on the
glass.
Step 1: Move the metal cover strips up from the
upper side.
28
Advertisement
Table of Contents
