Table of Contents
Advertisement
WARNING!
the sum of all calculation values must be higher
than 0.5. At a value lower than 0.5, the gas fire
will not function according to standard EN613.
Deviating configurations can be presented to
Kalfire for written approval.
4.3
Check the gas fire
Confirm mechanical operation
Check if all moving parts of the gas fire are
functioning correctly,
principally the door, before installing the
fireplace.
4.4
Check UTP connection and/or WiFi
signal
For correct and stable operation of the fireplace,
it is recommended to connect the fireplace to the
home router with a fixed LAN connection. Check
whether it is possible to make this connection. If
necessary, the house router and fireplace can be
connected via Wi-Fi. Check the Wi-Fi signal at the
fireplace. See also paragraph 5.3.
14
Advertisement
Table of Contents
