Emerson Rosemount Wireless WT210 Quick Start Manual page 9

Corrosion transmitters

Hide thumbs Also See for Rosemount Wireless WT210:

October 2023

Section view of Universal Mount showing bolt position in strap

holder.

4. Take one end of the strap and load it into a strap holder

on the sensor bed assembly ensuring that the 3 pins of the

strap holder fully engage with 3 holes of the strap. Push down

the hold plate and torque each bolt to 10 Nm using the 10

mm socket and torque wrench. Once the last bolt has been

torqued to 10Nm, check the first other bolts to ensure they are

still torqued to at least 10Nm.

Hold plate is transparent in image on left.

5. Fit Universal Mount holder and torque M8 stud nuts of the

sensor bed assembly to 10 Nm.

Quick Start Guide

Table of Contents