October 2023
6. Torque M8 tensioner bolts using the 8 mm socket and torque
wrench to the recommended torques indicated in the table
below for the diameter of pipe you are installing on.
Note
Do not apply torque to bolt in one go. Apply approximately 2
to 3 turns to each M8 Tensioner Bolt in an alternating fashion.
As the torque is applied:
•
•
NPS
4–6
7–10
12–16
18–20
Quick Start Guide
Monitor bolt length to ensure lengths are approximately
equal.
Ensure Sliders are as parallel to sensor bed as possible.
Recommended
install torque per
bolt (Nm)
6
8
10
12
Quick Start Guide
Recommended
install torque per
bolt (ft-lbs)
4.4
5.9
7.4
8.9
15